Matakishi's Tea House
A simple little site...
Star Trek
November-December 2006
I’ve always liked Star Trek, well, the original series anyway. The sequels and movies leave me cold I’m afraid. I quite enjoyed the cartoon episodes that I saw and I’m looking forward to buying the dvd set when it’s released. More recently, Star Trek New Voyages is keeping the original series alive with new episodes on the internet which I think are excellent, especially considering they’re put together by fans working for free.
I’ve always wanted to do a Star Trek miniatures game but there have not been any figures released in the original uniforms that are worth getting or easily available.
Eureka used to do some but they weren’t licensed so they were pulled and First Corps have these in their gallery but they’re not very good in my opinion.
Eureka figures
First Corps figures
The answer was to make my own. I had a go and I am not good at sculpting things so I soon gave up. Help was at hand though in the form of Brian Cooke who sculpted me the figures I needed for a very reasonable fee.
I needed to keep the costs low; I can’t sell these to recoup the cost of the masters and moulds, so a series of dedicated poses was out of the question.
I decided to go for two male bodies and one female. I settled on a standing pose for the female and one of the male bodies and then a walking pose for the second male to add some variety. I didn’t want anything too ‘action packed’ as Federation crewmen seldom seem to do anything more energetic than a quick jog.
To accompany my bodies I asked Brian to make a series of heads, male and female, Human, Vulcan and Andorian. The budgetary constraints of the original series were coming to my rescue here as the human bodies will do for all three races. I can always take heads from existing 28mm figures and do some conversions for even more variety.
I had al the arms made separately too. They can be positioned in a lot of different ways. There are male and female arms with hands operating phasers, communicators and tricorders as well as just empty hand versions.
Finally there are separate phasers, tricorders, communicators and a phaser rifle to add to the figures’ belts etc.
So, now I’ve got my greens and I’m on the verge of getting some masters cast up. It wasn’t cheap getting this far but this is probably the one single setting I’ve always wanted to wargame and I consider the cost worth it.
I’ve always liked Star Trek, well, the original series anyway. The sequels and movies leave me cold I’m afraid. I quite enjoyed the cartoon episodes that I saw and I’m looking forward to buying the dvd set when it’s released. More recently, Star Trek New Voyages is keeping the original series alive with new episodes on the internet which I think are excellent, especially considering they’re put together by fans working for free.
I’ve always wanted to do a Star Trek miniatures game but there have not been any figures released in the original uniforms that are worth getting or easily available.
Eureka used to do some but they weren’t licensed so they were pulled and First Corps have these in their gallery but they’re not very good in my opinion.
Eureka figures
First Corps figures
The answer was to make my own. I had a go and I am not good at sculpting things so I soon gave up. Help was at hand though in the form of Brian Cooke who sculpted me the figures I needed for a very reasonable fee.
I needed to keep the costs low; I can’t sell these to recoup the cost of the masters and moulds, so a series of dedicated poses was out of the question.
I decided to go for two male bodies and one female. I settled on a standing pose for the female and one of the male bodies and then a walking pose for the second male to add some variety. I didn’t want anything too ‘action packed’ as Federation crewmen seldom seem to do anything more energetic than a quick jog.
To accompany my bodies I asked Brian to make a series of heads, male and female, Human, Vulcan and Andorian. The budgetary constraints of the original series were coming to my rescue here as the human bodies will do for all three races. I can always take heads from existing 28mm figures and do some conversions for even more variety.
I had al the arms made separately too. They can be positioned in a lot of different ways. There are male and female arms with hands operating phasers, communicators and tricorders as well as just empty hand versions.
Finally there are separate phasers, tricorders, communicators and a phaser rifle to add to the figures’ belts etc.
So, now I’ve got my greens and I’m on the verge of getting some masters cast up. It wasn’t cheap getting this far but this is probably the one single setting I’ve always wanted to wargame and I consider the cost worth it.
Update 2009
I had a lot of trouble finding a caster for the original greens and I didn't like the size either, they were sculpted beautifully in true human proportions which made them too slight for me to enjoy painting so I sold the greens on and asked Brian to make me a new, larger set. This he did, here they are:
Ben at Black Cat Bases made a mold for me and I finally had some castings. Alas, these were still too small for me to see and work on comfortably. I spent many hours trying to assemble them and finally gave up in frustration.
Andy Mac came to my rescue and agreed to assemble and paint a few for me. He did a fantastic job as always:
I am going to try for a third time lucky and commission some larger ones. Watch this space...
Here's a comparison shot with some other manufacturers' figures.
In the mean time, I have an initial production run to get rid of so you can receive a set (or two, or three) if you make a donation to the Tea House here:
UPDATE: Well, response has been far better than I anticipated so I am now casting the crew figures to order. Please order as many sets as you like, current turnaround time is about two weeks.
The next set, sculpted by Mike Broadbent is underway, more news on this as I get it.
Ben at Black Cat Bases made a mold for me and I finally had some castings. Alas, these were still too small for me to see and work on comfortably. I spent many hours trying to assemble them and finally gave up in frustration.
Andy Mac came to my rescue and agreed to assemble and paint a few for me. He did a fantastic job as always:
I am going to try for a third time lucky and commission some larger ones. Watch this space...
Here's a comparison shot with some other manufacturers' figures.
In the mean time, I have an initial production run to get rid of so you can receive a set (or two, or three) if you make a donation to the Tea House here:
UPDATE: Well, response has been far better than I anticipated so I am now casting the crew figures to order. Please order as many sets as you like, current turnaround time is about two weeks.
The next set, sculpted by Mike Broadbent is underway, more news on this as I get it.
